New beta 11.x version

[IBERO]

Buenas tardes Orux.

Muchas gracias por tu enorme e increíble trabajo.

 No se podría poner un ring tone para cuando te alejas de la ruta y otro diferente para cuando regresas y estás de nuevo sobre la ruta?

[Tronpo]

Hello Orux, would it be possible to create a waypoint for the beginning of the climber section? Voice alerts and graphics work well, but a visual reference of when the section begins on the Map is missing. Greetings

I add, this waypoint of start of the climber section could contain the information of said section, such as average slope, total, distance etc., we can do a study of the route and its sections on the corresponding screens of the sections of the climber, but not once the route is set in the main map viewer.

[IBERO]

Buenas tardes Orux.

Muchas gracias por tu enorme e increíble trabajo.

 No se podría poner un ring tone para cuando te alejas de la ruta y otro diferente para cuando regresas y estás de nuevo sobre la ruta?

Buenas tardes Orux.

Muchas gracias por tu enorme e increíble trabajo.

Orux con tu permiso, creo que sería una enorme mejora en la aplicación, que cuando se regresara a la ruta, (pero no a "x" metros de la ruta, sino justo encima/sobre de la ruta), avisará con el ring tone distinto, al del alejamiento.

Muchas gracias

[orux]

Buenas tardes Orux.

Muchas gracias por tu enorme e increíble trabajo.

Orux con tu permiso, creo que sería una enorme mejora en la aplicación, que cuando se regresara a la ruta, (pero no a "x" metros de la ruta, sino justo encima/sobre de la ruta), avisará con el ring tone distinto, al del alejamiento.

Muchas gracias

Buenas!

Justo justo sobre la ruta es difícil calcular, por la desviación del GPS...

Pero puedo hacer que avise cuando estás a 1/2 de la distancia de aviso alejamiento. Por ejemplo, si está el ajuste por defecto de 80 mts, avisaría a 40 mts. Por debajo, dependiendo de las circunstancias de visibilidad de cielo, calidad GPS,... puede ser complicado.

Añadiré también un ajuste para cambiar el tono por defecto de 'sobre ruta otra vez'


orux

[IBERO]

Muchas gracias Orux. Seguiremos probando, el fantástico trabajo que desarrollas a traves de las actualizaciones que vas colgando, las cuales esperamos con ilusión, para ver con qué novedad nos sorprendes nuevamente.

[Tronpo]

https://oruxmaps.com/forum/index.php?topic=44981.0

Hello, in the betas this error remains

[Tronpo]

Hello, if I have configured the migration to the sd card does not allow me to create maps with in mbtiles format with the map creator, I get an error when creating the database. If I don't configure the use of the sd, the map is created correctly in mbtiles. Android 10. Can someone else verify? Greetings

[Tronpo]

Hello Orux!! The brouter matching function/tool works well, if you use a profile and tolerance appropriate to the original route, taking into account that the generated route is through brouter why not open this route directly in the planner? It will be an important plus to finish retouching and accurately adapt the final route. It would be the closest step to modifying an existing route, the dream of many of us since always... PS: I would pay for it

[Tronpo]

Hello Orux!! The IOS version offers some configuration options that make the user's life much easier, things as simple as the size of the GPS cursor have always been a headache for many users, implementing this setting in the GP version (or in the beta) for sure would be very grateful for the community not to mention the height adjustment of the well-known "cursor down" greetings!!

[IBERO]

Hola Orux. Cuando utilizo OPEN CAMERA, para crear un waypoint-foto, tanto en la beta como en la GP, no me deja previsualizar la foto, para decidir si la conservo o la elimino, directamente me crea el Waypoint-foto en el mapa.

Gracias.

[Tronpo]

https://oruxmaps.com/forum/index.php?topic=44981.0

Hello, in the betas this error remains

Hi Orux, this was fixed in beta 13, thanks.

Regarding Android 11 or higher and the use of SD card storage: in this series of betas it is not allowed. If I remember correctly, this was possible before. With the use of Android Media, the app should be able to migrate data to the SD card. Other apps, such as BRouter, can still migrate their data to the SD card without issues.

About BRouter: when the BRouter files are stored on the SD card, OruxMaps does not have access to the profiles. The window to select the folder and grant permission appears, but the action never completes. Curiously, OruxMaps does have access to the segments, so it is still possible to plan routes using OM profiles.

I could swear we had already fixed this.

One of the advantages of using Android Media was being able to use external SD storage again. I can't go far enough back in time to say exactly when this stopped working.

Greetings.

[tof]

Hi Orux,

I use Orux a lot for cycling, and I also have a Garmin Varia RTL515 radar. At the moment, I need to use a dedicated smartphone with the Garmin app to access the radar features.My smartphone is equipped with ANT+ and Bluetooth technology.

Some bike computers can read radar data from different brands and display the information. Do you think it would be possible to add this functionality to Orux as well? For beginning just an alert signal with a sound if there is vehicule and another sound the end of the alert would be enought.Of course, if that's possible and if other members are interested?

Best regards.

[Tronpo]

Hi Orux,

I use Orux a lot for cycling, and I also have a Garmin Varia RTL515 radar. At the moment, I need to use a dedicated smartphone with the Garmin app to access the radar features.My smartphone is equipped with ANT+ and Bluetooth technology.

Some bike computers can read radar data from different brands and display the information. Do you think it would be possible to add this functionality to Orux as well? For beginning just an alert signal with a sound if there is vehicule and another sound the end of the alert would be enought.Of course, if that's possible and if other members are interested?

Best regards.

https://oruxmaps.com/forum/index.php?topic=44534.0#msg58746

This request is also very interesting for me, I recover this thread from the forum in case it was of help to the developer

[Tronpo]

Hello Orux.
In the lab tests I noticed that the side board when we put the device horizontally, changes the number of data fields
With the device position setting to automatic, the side panel has 8 fields

The same board with the device's position setting in landscape loses the last field, spaces are added between the fields that make them stay at 7.

It is an inheritance error
Greetings

[tof]

Hello everyone,

I use GPX tracks that can start at different locations.
These tracks don't contain any waypoints, only a start point and an end point, and the start point is not important for me.

When I load a GPX file in OruxMaps, I go to:
Options → Loaded route → More,
then I check Follow route + Route alarm, and in the recording options I select Start new track.

The app correctly calculates a route to reach the starting point of the track, which works fine, but that's not what I want.
For example, I would like to join the track at kilometer 5, without ever going through the official starting point.

Right now, with the route alarm enabled, OruxMaps keeps warning me that I'm off the route (which makes sense, since I'm heading toward km 5 using a different road).
It keeps trying to adjust the route, but without success.

So my question is:
Is there an option that warns me only once that I'm off the route, lets me ignore that warning, and then automatically detects when I join the track again, no matter where? 
(Keeping in mind that the track may pass through the same place on the outbound and return sections.)

I enable route following from the beginning because, in my example, I only need notifications after kilometer 5 if I take a wrong turn.

Thanks in advance.