Buenas dias (correct ??)
some colleagues user of Oruxmaps were interested by the option allowing
active route painted using colors based on slope.
The actual value of the slope are very well for cycling but too low for skiing
it will be interesting to can change the slope range
Classical skiing slope use 3 or 4 color for angle > 30°, >35°, >40° and > 45.
Notice that slope is in degrees instead of %.
Thanks every day for this swiss knife
epapy
Slope colouring is being implemented in the last beta series. See //http://oruxmaps.com/foro/viewtopic.php?f=4&t=4743
Thanks for the answer...but it seems only to affect the slope indication as parameter.
For the changing color of a track depending of the slope the legend still varies from -25 % to +25 % despite the unit i choose.
I will take a look on next betas.
Thanks anymore
I know. But in skitouring track or route inclination is rarely interesting, unless you are following a forced path. On an open field, regardless of the slope angle you can always adjust your line steepness. What you are really interested in is slope inclination to evaluate ski difficulty and/or avalanche risk.
That said, since the "steep" concept is quite subjective, having different colour ramps could be interesting for cycling too.
After years using this slope color feature for hiking I fully agree that the max slope of 25% is far too low. Most slopes uphill get coloured red, no matter It is a moderate 20% slope or strenuous 50% climb. In the upshot, while hiking you just read the colors as follows:
- various colors green, light blues and orange: almost flat.
- mid orange and blue: mild slope.
- red or dark blue: moderate, strong and strenuous slopes.
That is, 3 colors for flat or almost flat and one single color for mid, strong and very strong slopes!!!
I would propose an additional selectable slope color scale going up to +/- 40% or, even better, making that max slope parameter value user selectable.
Hello,
are there news on colouring of the slope? I have the same "problem" as ilopezc: it the slope is not flat, it gets immediately red/dark blue. The possibility to customize, like other features, would be great.
kind regards